PHOENIX-2000 Foam Airplane Ready to Fly RTF

Specifications:   

²  Length:   973mm

²  Wing Span:   1100mm (type A), 1080mm (type B)

²  Wing Area:   22.53 sq.dm (type A), 20.56 sq.dm (type B)

²  Flying Weight:   670g (type A), 690g (type B)

²  Wing Loading Weight:   29.74g/ sq.dm (type A), 33.56g sq.dm (type B)

²  Package Box:   950 X 365 X 230mm

²  Carton:   970 X 490 X 750mm, 4PCS/CTN

²  G.W.:   2KG

Basic Equipments Included: 

²  Radio Control:   PPM-FM, 4CH, throttle (right hand)

²  Servo:   9g*2pcs (type A), 9g*4pcs (type B)

²  Motor:   KV950, 2830 outer runner brushless motor

²  ESC:   18A brushless ESC

²  Propeller:   SAPAC 8060, three blades

²  Battery:   9.6-10.8V 1000mAh Ni-MH

²  Charger:   10.8V (national standard plug)

²  Upgradeable Equipments: 

²  Battery:   11.1V, 1200MAH Li-Po

²  Charger:   12.6V for Li-Po battery

Features: 

²  Wings can be changeable. This plane can performance various flight features and meets most of RC model fans’ needs of flying the monoplane. Practice aerobatics with the monoplane, will save a lot of money spent on many training planes and aerobatic planes for fans.

²  Made from high intense engineering plastic, there is no need any more to worry about fall, collision and crash damage for beginners to practice flying.

²  Elegant appearance, simple structure, easy maintenance and adjustment, outstanding flying performance and super quality.

²  This plane is equipped with one set standard fuselage assembly, two sets of standard wing assembly, one set standard tail wing assembly. There are installation holes for two sets standard wing named No.1 and No.2. No.1 stands for wings should be installed on the upper jack of fuselage; No.2 stands for wings should be located on the middle jack of fuselage. Type A wing is suitable for slow speed sailplane flying, type B is applicable for aerobatic planes flying.